Description
Global and China Wafer Foundry Industry Report, 2013-2014 is all about the followings:
1. Overview of Global Semiconductor Industry
2. Downstream Market of Wafer Foundry Industry
3. Wafer Foundry Industry
4. Semiconductor Industry in China
5. 13 Key Wafer Foundry Vendors
View Full Report At: http://www.marketresearchreports.biz/analysis/222984
The wafer foundry market experienced a wavy development, jumping by 39.4% in 2010 following a 7.9% decline in 2009. And the growth rate first shrank to 8.7% in 2011, then expanded to 21.7% in 2012, and fell back to 6.8% in 2013. It is projected that the growth rate will stand at 15.6% in 2014 and 6.0% in 2015. The fluctuation in the wafer foundry market will begin to present an increasingly small growth rate, which is mainly because of the differentiation in wafer foundry industry.
In terms of product type, foundry can be divided into two categories: Logic IC Foundry and specifically Foundry. The former is mainly comprised of high-shipment Logic IC, including CPU, GPU, Baseband, Application Processor, FPGA, APU, PLD, Networking Processor, and DTV MPU, etc. And the latter primarily consists of analog IC, mixed signals, Power IC, NVM, RF/HPA, CIS, MEMS, DDI (Display Driver). For the former, it is necessary to continuously improve manufacturing process and constantly narrow the line width, which could not only improve performance and reduce power consumption, but also reduce costs.
Download Sample Of This Report: http://www.marketresearchreports.biz/sample/sample/222984
These products update quickly, with the life cycle typically no more than three years, which requires a massive fund for developing next-generation technologies. As for the latter, however, its products have a long life cycle, with the life cycle for analog IC generally exceeding 5-10 years. And even a more than 20-year life cycle is not rare. These products can narrow line width but fail to reduce costs, and could increase costs instead. The specifically Foundry has a small market size and stable sales volume, but with low costs and high returns. In contrast, Logic IC Foundry has a large market size, but with a considerable fluctuation. Most important, only the leading player in the Logic IC Foundry industry can make profit, otherwise it is easy to make a loss. Take TSMC for example, which has taken the lead in the global market since its establishment in 1987, with its market share never less than 50%. Besides, TSMC is also the wafer foundry vendor that earns the highest profit around the globe, with the gross margin never lower than 40% even close to 50% in 2014 (exceeding Apple and Qualcomm). The No.2, No.3 and No. 4 players have ever suffered losses for many years, with SMIC, for example, making profit only in 2010 during the 12 years from 2000 to 2011. And the third player, Global Foundries, has suffered losses for years, with the revenue in 2013 showing a slight growth but the operating loss expanding from AED2.217 billion to AED3.217 billion.
According to the nature of the vendors, the foundry businesses can be divided into two segments, namely, IDMs offering their excess capacity to third parties and pure-play (or dedicated) foundries, with the former including Samsung, Intel, and IBM. Global Foundries can be barely included in IDMs, for it originated from AMD. These vendors have long product lines, which makes it possible to cause competition with their customers. And IDMs, in reality, are not involved in foundry businesses and could conduct foundry business only when they have excess capacity. These IDMs will not become the first choice of the customers unless special reasons.
Money and technology do not always help do well in wafer foundry industry, which has been best illustrated by IBM. Recently, IBM was willing to pay USD1 billion for the sale of its wafer foundry business to Global Foundries. And Global Foundries suggested that the payment was very small and should be expanded to USD2 billion due to the fact that the business, which generates revenue of less than USD500 million annually, caused IBM to suffer approximately USD1.5 billion loss a year. Except TSMC, most foundries have more or less bought IBM's technology, especially Samsung, STMicroelectronics, and Global Foundries, which are all technologically brought up by IBM.
Over the years, the four giants—Samsung, STMicroelectronics, Global Foundries, and IBM have formed an alliance in a vain attempt to compete against TSMC. Instead, TSMC has grown stronger and stronger. After years of efforts, Samsung has won a client in wafer foundry business—Apple. Unfortunately, the order of Apple’s main products A8 was gained by TSMC in 2014, thus leading to the first loss of Samsung System LSI Division over the years.
Although Samsung’s 14nm technology seems to take the lead, this is not approved by Apple. This is mainly because the four companies—Samsung, STMicroelectronics, Global Foundries, and IBM all developed from IDM. And Samsung has a long product line and therefore could compete with any electronic company in the world. Previously, Apple did not choose TSMC because the company suffered capacity constraints, and as TSMC’s capacity was expanded and met Apple’s requirements, Apple lost no time in making a shift from Samsung to TSMC.
Table of Content
1 Global Semiconductor Industry
1.1 Overview of Semiconductor Market
1.2 Semiconductor Industry Suppy Chain
1.3 Overview of Semiconductor Industry
1.4 Semiconductor Industry Expenditure Trend
2 Foundry Downstream Market
2.1 Mobile Phone Market
2.2 Mobile Phone Industry
2.3 PC Market
2.4 Tablet PC Market
2.5 Baseband IC and AP industries
Related Reports
Global Umbilical Cord Cutting Machine Industry 2014 Market Research Report
View Full Report At: http://www.marketresearchreports.biz/analysis/233577
The report firstly introduced Umbilical Cord Cutting Machine basic information including Umbilical Cord Cutting Machine definition, classification, application and industry chain overview; Umbilical Cord Cutting Machine industry policy and plan, Umbilical Cord Cutting Machine product specification.
Download Sample Of This Report: http://www.marketresearchreports.biz/sample/sample/233577
In the end, the report introduced Umbilical Cord Cutting Machine new project SWOT analysis, investment feasibility analysis, and investment return analysis and Global Twin-screw Extruder industry.
Global Focimeter Industry 2014 Market Research Report
View Full Report At: http://www.marketresearchreports.biz/analysis/233578
The report including six parts, the first part mainly introduced the product basic information; the second part mainly analyzed the Asia Focimeter industry; the third part mainly analyzed the North American Focimeter industry.
Download Sample Of This Report: http://www.marketresearchreports.biz/sample/sample/233578
The report firstly introduced Focimeter basic information including Focimeter definition, classification, application and industry chain overview; Focimeter industry policy and plan, Focimeter product specification, manufacturing process, cost structure etc.
About Us
MarketResearchReports.biz is the most comprehensive collection of market research reports. MarketResearchReports.Biz services are specially designed to save time and money for our clients. We are a one stop solution for all your research needs, our main offerings are syndicated research reports, custom research, subscription access and consulting services. We serve all sizes and types of companies spanning across various industries.
Contact Us
Office: State Tower
90 Sate Street, Suite 700
Albany, NY 12207
United States
Tel: +1-518-618-1030
USA: Canada Toll Free: 866-997-4948
Website: http://www.marketresearchreports.biz/
E: sales@marketresearchreports.biz
Global and China Wafer Foundry Industry Report, 2013-2014 is all about the followings:
1. Overview of Global Semiconductor Industry
2. Downstream Market of Wafer Foundry Industry
3. Wafer Foundry Industry
4. Semiconductor Industry in China
5. 13 Key Wafer Foundry Vendors
View Full Report At: http://www.marketresearchreports.biz/analysis/222984
The wafer foundry market experienced a wavy development, jumping by 39.4% in 2010 following a 7.9% decline in 2009. And the growth rate first shrank to 8.7% in 2011, then expanded to 21.7% in 2012, and fell back to 6.8% in 2013. It is projected that the growth rate will stand at 15.6% in 2014 and 6.0% in 2015. The fluctuation in the wafer foundry market will begin to present an increasingly small growth rate, which is mainly because of the differentiation in wafer foundry industry.
In terms of product type, foundry can be divided into two categories: Logic IC Foundry and specifically Foundry. The former is mainly comprised of high-shipment Logic IC, including CPU, GPU, Baseband, Application Processor, FPGA, APU, PLD, Networking Processor, and DTV MPU, etc. And the latter primarily consists of analog IC, mixed signals, Power IC, NVM, RF/HPA, CIS, MEMS, DDI (Display Driver). For the former, it is necessary to continuously improve manufacturing process and constantly narrow the line width, which could not only improve performance and reduce power consumption, but also reduce costs.
Download Sample Of This Report: http://www.marketresearchreports.biz/sample/sample/222984
These products update quickly, with the life cycle typically no more than three years, which requires a massive fund for developing next-generation technologies. As for the latter, however, its products have a long life cycle, with the life cycle for analog IC generally exceeding 5-10 years. And even a more than 20-year life cycle is not rare. These products can narrow line width but fail to reduce costs, and could increase costs instead. The specifically Foundry has a small market size and stable sales volume, but with low costs and high returns. In contrast, Logic IC Foundry has a large market size, but with a considerable fluctuation. Most important, only the leading player in the Logic IC Foundry industry can make profit, otherwise it is easy to make a loss. Take TSMC for example, which has taken the lead in the global market since its establishment in 1987, with its market share never less than 50%. Besides, TSMC is also the wafer foundry vendor that earns the highest profit around the globe, with the gross margin never lower than 40% even close to 50% in 2014 (exceeding Apple and Qualcomm). The No.2, No.3 and No. 4 players have ever suffered losses for many years, with SMIC, for example, making profit only in 2010 during the 12 years from 2000 to 2011. And the third player, Global Foundries, has suffered losses for years, with the revenue in 2013 showing a slight growth but the operating loss expanding from AED2.217 billion to AED3.217 billion.
According to the nature of the vendors, the foundry businesses can be divided into two segments, namely, IDMs offering their excess capacity to third parties and pure-play (or dedicated) foundries, with the former including Samsung, Intel, and IBM. Global Foundries can be barely included in IDMs, for it originated from AMD. These vendors have long product lines, which makes it possible to cause competition with their customers. And IDMs, in reality, are not involved in foundry businesses and could conduct foundry business only when they have excess capacity. These IDMs will not become the first choice of the customers unless special reasons.
Money and technology do not always help do well in wafer foundry industry, which has been best illustrated by IBM. Recently, IBM was willing to pay USD1 billion for the sale of its wafer foundry business to Global Foundries. And Global Foundries suggested that the payment was very small and should be expanded to USD2 billion due to the fact that the business, which generates revenue of less than USD500 million annually, caused IBM to suffer approximately USD1.5 billion loss a year. Except TSMC, most foundries have more or less bought IBM's technology, especially Samsung, STMicroelectronics, and Global Foundries, which are all technologically brought up by IBM.
Over the years, the four giants—Samsung, STMicroelectronics, Global Foundries, and IBM have formed an alliance in a vain attempt to compete against TSMC. Instead, TSMC has grown stronger and stronger. After years of efforts, Samsung has won a client in wafer foundry business—Apple. Unfortunately, the order of Apple’s main products A8 was gained by TSMC in 2014, thus leading to the first loss of Samsung System LSI Division over the years.
Although Samsung’s 14nm technology seems to take the lead, this is not approved by Apple. This is mainly because the four companies—Samsung, STMicroelectronics, Global Foundries, and IBM all developed from IDM. And Samsung has a long product line and therefore could compete with any electronic company in the world. Previously, Apple did not choose TSMC because the company suffered capacity constraints, and as TSMC’s capacity was expanded and met Apple’s requirements, Apple lost no time in making a shift from Samsung to TSMC.
Table of Content
1 Global Semiconductor Industry
1.1 Overview of Semiconductor Market
1.2 Semiconductor Industry Suppy Chain
1.3 Overview of Semiconductor Industry
1.4 Semiconductor Industry Expenditure Trend
2 Foundry Downstream Market
2.1 Mobile Phone Market
2.2 Mobile Phone Industry
2.3 PC Market
2.4 Tablet PC Market
2.5 Baseband IC and AP industries
Related Reports
Global Umbilical Cord Cutting Machine Industry 2014 Market Research Report
View Full Report At: http://www.marketresearchreports.biz/analysis/233577
The report firstly introduced Umbilical Cord Cutting Machine basic information including Umbilical Cord Cutting Machine definition, classification, application and industry chain overview; Umbilical Cord Cutting Machine industry policy and plan, Umbilical Cord Cutting Machine product specification.
Download Sample Of This Report: http://www.marketresearchreports.biz/sample/sample/233577
In the end, the report introduced Umbilical Cord Cutting Machine new project SWOT analysis, investment feasibility analysis, and investment return analysis and Global Twin-screw Extruder industry.
Global Focimeter Industry 2014 Market Research Report
View Full Report At: http://www.marketresearchreports.biz/analysis/233578
The report including six parts, the first part mainly introduced the product basic information; the second part mainly analyzed the Asia Focimeter industry; the third part mainly analyzed the North American Focimeter industry.
Download Sample Of This Report: http://www.marketresearchreports.biz/sample/sample/233578
The report firstly introduced Focimeter basic information including Focimeter definition, classification, application and industry chain overview; Focimeter industry policy and plan, Focimeter product specification, manufacturing process, cost structure etc.
About Us
MarketResearchReports.biz is the most comprehensive collection of market research reports. MarketResearchReports.Biz services are specially designed to save time and money for our clients. We are a one stop solution for all your research needs, our main offerings are syndicated research reports, custom research, subscription access and consulting services. We serve all sizes and types of companies spanning across various industries.
Contact Us
Office: State Tower
90 Sate Street, Suite 700
Albany, NY 12207
United States
Tel: +1-518-618-1030
USA: Canada Toll Free: 866-997-4948
Website: http://www.marketresearchreports.biz/
E: sales@marketresearchreports.biz
0 comments:
Post a Comment